Home > Sawing > Horizontal Bandsaws Go Back
REQUEST PRICE

MACHINE INFORMATION AND SPECIFICATION

  • Manufacturer:
  • Amada
  • Model:
  • Amada HFA530CNC automatic bandsaw
  • Condition:
  • 1
  • YOM:
  • NA
  • Control:
  • NA
  • Price:
  • POA
  • Country:
  • N/A

DESCRIPTION

Bandsaw Machine Amada HFA530CNC Amada have designed this automatic bandsaw machine in such a way that the cutting of material is done by the upper edge of the bandsaw blade thus reducing the height of the support columns by 50%.This creates a far more rigid structure enabling faster cutting and longer blade life. Windows based CNC Control The Functions and set up of the bandsaw are controlled by a Windows based touch screen. Simple to use it enables the operator to choose the size, type, tolerance and number of cuts required of most materials, then JUST PRESS GO. The machine will cut the Material and give optimum performance.The screen gives an estimated finish time for each job.A history of cutting and fault finding information is also accessible. Motor and Transmission A high powered 7.5 kw motor coupled with a special high efficiency transmission maintains high cutting rates even when cutting the toughest of materials. Maximum Blade Width A 67mm wide blade 6670 mm long 1.6mm thick gives a very high beam strength enabling faster down feeds achieving phenominal cutting rates even on tough materials such as Inconel, Hastelloy and Monel. Automatic Adjust Double Wire Brushes Automatically adjusted double wire brush design assures keeping the chip area of the blade clean for maximum life of blade and brushes in all types of cutting. Automatic powered chip conveyor Maximum Cutting Capacity Round bar: 530mm Rectangular bar: 530mm x 530mm
+ request more information

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

SHARE PAGE

REQUEST MORE INFORMATION

SEND ENQUIRY

*I AM A
Dealer
End User
Check here if you no longer wish to subscribe to our newsletter.

You may also be interested in these Machines

    •
      Manufacturer:
      STARTRITE
      Model:
      startrite meba sm200 horizontal bandsaw ex british airways 1200vat
      Description:
      Startrite Meba SM200 Horizontal Bandsaw. Ex- British Airways C/w with Quick release vice & coolant.

      More Info

    • Manufacturer:
      STARTRITE
      Model:
      startrite 316 horizontal
      Description:
      Machine Specifications: Horizontal / Vertical / Manual / Semi Au Vertical Cutting Diameter (mm) 30″ throat Dimensions Of Saw-Band (mm) 16mm Cutting Speed (M/S) 90-3600 Main Drive Power (KW/V/Hz) 415v Feed Hydraulic Welder Yes

      More Info

    • Manufacturer:
      Amada
      Model:
      Amada CTB400 automatic bandsaw
      Description:
      Bandsaw Machine CTB400CNC The Amada CTB400CNC automatic bandsaw is designed for cutting difficult to saw materials fully automatically and with the minimum operator setup time. The cutting of material is done by a vertical saw frame which doesn’t r...

      More Info

    • Manufacturer:
      Model:
      Band saw
      Description:
      {"Cut range: round up to": "10 - 260 mm", "Square": "260 x 260 mm", "vertical": "", "hydraulic": "", "Automatic": "", "Cut length:": "", "min.": "5 mm", "max": "680 mm", "Max. automatic forward": "", "feed length": "680 mm", "stepless": "", "from": "...

      More Info

    SEND ENQUIRY

    *I AM A
    Dealer
    End User